The dimension of the flags and the height of the flags are also influenced through the latest developments. So we began also to produce higher flag columns and also flag columns with lifts. Since the dimensions of the flags and the height of the columns have changed, it has been much more difficult to go on with the flagstaff process by using ropes or guys. So the usage of flag columns with lifts has become much wider.
You may push at the start button and the flagstaff process may begin. This process is carried out by a guy and this guy carries the flag. The process stops automatically when the flag is above. When you push at the button again the flag may go down. The flag may be able to wave opposite to the direction of the wind thanks to the revolving cover on it that can turn around an angle of 360º.

Using flag columns with lifts is very easy. We may send you the anchorage team and you may go through the excavation – grounding and concreting process according to the basic project which we may send you. After the production process of the columns is competed, they will be sent to the construction site. Than, the columns are to be lifted down with the help of an elevator and they are put together on the ground by means of a shovel.  After this process, the assembly process of the lift begins. The pieces of the lift system are put together, the rope is stretched and than the assembly process of the lift begins. After this process, the materials are carried via an elevator and than they are assembled. The flagstaff process begins after the fine tuning settings are completed. Than an authority charged with the flagstaff process is trained to use the system. At the end the delivery period is successfully carried out.

Lifts are used if the projector columns are higher than 25 metres. High columns, at which lifts are used, include a flight warning light and thunderbolt catching point.