It will be difficult and dangerous for a person to climb at the top of the projector column if it is too high. At this point projector columns with lifts are used in order to provide an easier and safer work.

The projector columns with lifts are used if the projector columns are higher than 25 metres. This is of course the most appropriate length that is offered by us, but it can change according to the demands of our customers. Since there is no ladder, the projector must be lifted down in order to work on it. 

It is not possible to use baskets within the lifts, so circles are used instead of baskets and the projectors are placed around these circles. The size of may vary. It depends upon the amount of the projectors that is required.

The usage of the projector columns with lifts is very simple and the system is the same that is used for the flag columns with lifts. There are two types of lift system. One is a system that can be locked. This is also the type which we offer. The other is a basic system. The system is locked after the projector is lifted through the system that can be locked. This may be helpful in order to prevent undesirable situations.