|
 Projector columns also include protective stairs. The galvanized projector columns are generally at 14 metres high and are produced by means of a ladder that is assembled to the top of the projector column. This ladder is formed with the help of sheet irons.
There is a distance of 50 cm per sheet iron. A man will be able to climb to the top of the projector with the help of a ladder made of these iron sheets. The ladder of sheet iron is very important in terms of security. The annexes that are used in order to assemble a projector are also appropriate to assemble a projector column including a portable ladder.
|
|
|
Generally projector columns are used in order to enlighten the fields. The shafts of the columns include lama and we provide an “S” - shaped irons for you, so that it will be convenient to transmit these columns by using this iron.
The projectors including a safeguard basket are assembled by means of lamas. The projector columns with lamas (T console) are welded to the columns. There is also a platform known as a safeguard basket system without a cornerpiece. All these systems differ from each other.  Projector columns with safeguard baskets: The safeguard baskets, fixed to the top of the projector with the help of salmons and washers, enlighten a wide area. Different systems may be used in order to fix the safeguard baskets concerning the demands of the customers.
The safeguard baskets are designed in a way, so that anyone can simply climb up to the top of the projector column and work there. There is a gap at one side of the safeguard basket, so that anyone who climbs the stairs of the ladder up and reaches the top of the projector may enter into the safeguard basket by means of this gap. There are also barriers within the safeguard basket and the corner pieces of this barrier are at the level of waist of a person. Projector columns with safeguard baskets are strictly important. It is also important that the person, who is to climb up to the top of the projector and to work within the safeguard basket must be able to pass easily through the gap of the basket and the basket should be fixed by paying attention to the balance between the stairs of the ladder. 
Projector columns with lamas (T consol): We fix the holes of the projector columns with a lama according to the demands of the customers. The angle of the area to be enlightened is also important. We form this angle by means of the information we get from our customers. 
Platform projector columns:
The annexes that are used in order to assemble the platform are also the annexes that are formed before the corner pieces of the safeguard basket are assembled. The difference between the lama and the annex is that it is not possible to reach different angles by using lamas. Platform projector columns are able to lighten 2, 3 or 4 directions. |
|
|
 It will be difficult and dangerous for a person to climb at the top of the projector column if it is too high. At this point projector columns with lifts are used in order to provide an easier and safer work.
The projector columns with lifts are used if the projector columns are higher than 25 metres. This is of course the most appropriate length that is offered by us, but it can change according to the demands of our customers. Since there is no ladder, the projector must be lifted down in order to work on it. It is not possible to use baskets within the lifts, so circles are used instead of baskets and the projectors are placed around these circles. The size of may vary. It depends upon the amount of the projectors that is required.  The usage of the projector columns with lifts is very simple and the system is the same that is used for the flag columns with lifts. There are two types of lift system. One is a system that can be locked. This is also the type which we offer. The other is a basic system. The system is locked after the projector is lifted through the system that can be locked. This may be helpful in order to prevent undesirable situations.
|
|
|
Projector columns 
